One could only guess that the rationale for lack of DNS caching in RHEL is the arguable efficiency for those systems which aren’t network connected or simply don’t need to make any DNS lookups.
There are of course such cases where you don’t need (many) DNS resolutions. I can think of:
- a dedicated DB server
- a private server where all hosts are listed in the
Those systems will likely issue zero to none DNS lookups while running, and DNS cache isn’t really a thing for them.
But for the most intents of running either a desktop or server RHEL machines, you will absolutely benefit from a DNS cache.
Enabling DNS cache in RHEL 7 and 8 is easy thanks to
dnsmasq integration of NetworkManager.
dnsmasq is a very lightweight caching DNS forwarder which runs great even on the tiniest hardware like your very own home router.
I won’t torture you with long instructions on how to enable the DNS cache. It’s really quick and goes down to:
yum -y install dnsmasq cat << 'EOF' | sudo tee /etc/NetworkManager/conf.d/dns.conf [main] dns=dnsmasq EOF systemctl reload NetworkManager
You have just made your machine already faster by running these.
For more details and fine-tuning, read on.
NetworkManager and dnsmasq
Let’s explain what happened when we ran the above commands to enable DNS caching.
In the first bit, we have installed the very essential of DNS caching –
Then we write out a file,
/etc/NetworkManager/conf.d/dns.conf, with contents telling NetworkManager to enable and use its
dnsmasq plugin. Then we reload NetworkManager configuration to apply our changes.
This, in turn, starts a private instance of
dnsmasq program, which is bound to the loopback interface,
127.0.0.1 and listening on standard DNS port, 53.
It doesn’t end there. NetworkManager now updated
/etc/resolv.conf and put
nameserver 127.0.0.1 so that the whole operating system will perform DNS lookups against its
dnsmasq itself will use whatever nameservers you had setup in NetworkManager explicitly, or the ones provided by DHCP requests.
Very clean and beautiful integration.
Verify dnsmasq is working
Simply perform a DNS lookup using
# yum -y install bind-utils dig +short example.com @127.0.0.1
If the output looks like a valid IP address or a list of IP addresses, then
dnsmasq is working OK.
You can also check that DNS caching is working. Perform a resolution against another domain by running the following command twice:
time getent hosts foo.example.com
real timing in the output reduced for the subsequent queries. E.g. first request yields:
real 0m0.048s user 0m0.006s sys 0m0.006s
Subsequent requests yield:
real 0m0.009s user 0m0.006s sys 0m0.002s
See what kind of DNS requests your system makes
To see what DNS request your system makes, you can temporarily enable logging of queries. Note that this will clear DNS cache because
dnsmasq will be restarted:
echo log-queries | sudo tee -a /etc/NetworkManager/dnsmasq.d/log.conf sudo systemctl reload NetworkManager
You can then
/var/log/messages file which will have information of requests being made. Example, on the web server that is using PaperTrail’s
dnsmasq: forwarded logs6.papertrailapp.com to 2606:4700:4700::1001 dnsmasq: reply logs6.papertrailapp.com is 22.214.171.124 dnsmasq: reply logs6.papertrailapp.com is 126.96.36.199 dnsmasq: reply logs6.papertrailapp.com is 188.8.131.52 dnsmasq: reply logs6.papertrailapp.com is 184.108.40.206
This approach may be used for finding what external sites your server communicates with.
Once you’re done, don’t forget to turn off the logging:
sudo rm /etc/NetworkManager/dnsmasq.d/log.conf sudo systemctl reload NetworkManager
How well is dnsmasq doing on your system
dnsmasq manpage has this to say:
When it receives a SIGUSR1, dnsmasq writes statistics to the system log. It writes the cache size, the number of names which have had to removed from the cache before they expired in order to
make room for new names and the total number of names that have been inserted into the cache. The number of cache hits and misses and the number of authoritative queries answered are also given.
So we can collect DNS query stats easily:
sudo pkill --signal USR1 dnsmasq && sudo tail /var/log/messages | grep dnsmasq
The output may include, for example:
dnsmasq: cache size 400, 0/60 cache insertions re-used unexpired cache entries. queries forwarded 30, queries answered locally 60
The 0 in
0/60 stands for “zero cache evictions”. So this number indicates that cache size is adequate. It should be as low as possible.
If that number is high, it means that cache size maybe not large enough.
We also see that 30 DNS lookups were forwarded over to upstream nameservers (misses), while 60 were satisfied directly by cache (hits).
Gathering stats like this will work well in case you only have one instance of dnsmasq. Sometimes you have more than one (e.g. libvirt may run one of its own).
It is more reliable to use the statistical information of dnsmasq that is exposed, not surprisingly, via DNS ???? The commands:
dig +short chaos txt hits.bind dig +short chaos txt misses.bind
… give you hits and misses, respectively.
With some command line magic, you can easily calculate your DNS cache hit-ratio:
# yum -y install bc echo "scale=2; $(dig +short chaos txt hits.bind)*100/($(dig +short chaos txt hits.bind)+$(dig +short chaos txt misses.bind))" | \ sed 's@"@@g' | bc
The output is a percentage of DNS requests that were satisfied by DNS cache, e.g.: 80.95%.
Tuning the cache size
The default cache size of
dnsmasq instance that is run by Networkmanager is 400.
This is a decent default for web servers.
For a desktop machine, you may want to increase it by large. This will assist with much less home router strain and faster network experience, especially if you’re a Chrome user. This browser does DNS caching of its own, but only as long as 1 minute – the issue that is discarded as a “feature”.
So to set DNS cache size to 20k, run:
echo cache-size=20000 | sudo tee -a /etc/NetworkManager/dnsmasq.d/cache.conf sudo systemctl reload NetworkManager
dnsmasq and your desktop
To expand the topic of the desktop use of dnsmasq, you can also leverage it to block tracking scripts and for speeding up your browsing experience:
sudo curl https://raw.githubusercontent.com/aghorler/lightweight-dnsmasq-blocklist/master/list.txt \ --output /etc/NetworkManager/dnsmasq.d/blocklist.conf sudo systemctl reload NetworkManager
Finally, you may also want to improve the DNS speed by ensuring minimum TTL for DNS records that have it set too low.
echo min-cache-ttl=1800 | sudo tee -a /etc/NetworkManager/dnsmasq.d/cache.conf sudo systemctl reload NetworkManager
This will ensure that even if a DNS record is configured with, e.g. 2 minutes TTL on remote nameserver,
dnsmasq will still cache it for 30 minutes.
Note that this is acceptable for desktop machines, but not for web servers:
Phew, now I think that’s about it for
dnsmasq today. Enjoy your faster DNS and be sure to subscribe for our Twitter for more fine articles ????